IS 1077: Common Burnt Clay Brick Requirements, Explained

IS 1077 is the Indian Standard that decides whether a common burnt clay brick is fit for a wall. It sets the strength class, size, water absorption and efflorescence limits a brick must meet. In November 2025, BIS published IS 1077:2025, the sixth revision, which replaces the 1992 edition that many tenders still quote. Here is what the current standard asks for.
Key takeaways
- The 2025 sixth revision is now the current specification for common burnt clay building bricks, replacing the 1992 edition.
- The standard sorts bricks into 11 classes, from 3.5 N/mm² to 35 N/mm² average compressive strength.
- Burnt clay bricks of 40 N/mm² and above fall under IS 2180 for heavy duty bricks, not this standard.
- Water absorption must not exceed 20% for classes up to 12.5, and 15% for higher classes.
- The 2025 edition adds a warpage limit of 3 mm or 5% of brick height, whichever is lower.
What is IS 1077?
IS 1077 is the Bureau of Indian Standards specification for common burnt clay building bricks used in buildings. It covers four things: classification, general quality, dimensions and physical requirements.
However, it leaves the test methods to IS 3495, Parts 1 to 4. Meanwhile, IS 5454:2024 sets how to draw samples from a lot.
What changed in IS 1077:2025?
The sixth revision makes three main changes. First, it states all values in SI units. Second, it updates the brick sizes. Third, it adds a warpage requirement that the 1992 edition did not have.
The class system and the absorption and efflorescence limits stay broadly the same. So the main change on site is the new warpage check, plus citing the 2025 edition in tenders and reports.
Brick classes and limits
IS 1077 classifies bricks by their average compressive strength, tested as per IS 3495 (Part 1). The class number is that strength in N/mm². The water absorption and efflorescence limits then depend on the class.
Class | Min. average strength (N/mm²) | Max. water absorption (24 h) | Efflorescence, not worse than |
35, 30, 25 | 35.0, 30.0, 25.0 | 15% | Slight |
20, 17.5, 15 | 20.0, 17.5, 15.0 | 15% | Slight |
12.5, 10 | 12.5, 10.0 | 20% | Moderate |
7.5, 5, 3.5 | 7.5, 5.0, 3.5 | 20% | Moderate |
Two further rules matter. No single brick may fall more than 15% below the minimum for its class. If one does, the lot is judged against the next lower class. Also, older drawings sometimes write classes in kgf/cm², so “Class 100” means about 10 N/mm².
Brick size and tolerances
The standard modular brick size is 190 × 90 × 90 mm, with a 190 × 90 × 40 mm variant for thinner courses. With a 10 mm mortar joint, both fit a 200 × 100 mm module.
Dimension | Target for 20 bricks | Allowed range |
Length | 3,800 mm | 3,720 to 3,880 mm |
Width | 1,800 mm | 1,760 to 1,840 mm |
Height, 90 mm brick | 1,800 mm | 1,760 to 1,840 mm |
Height, 40 mm brick | 800 mm | 760 to 840 mm |
The lab lays 20 whole bricks end to end and measures the full row in one stretch of tape. As a result, small differences between bricks average out. The 1992 edition also allowed non-modular sizes such as 230 × 110 × 70 mm. Because the 2025 edition revised brick sizes, confirm the size and tolerance in your contract before you order.
General quality and the frog
Every brick must be free from cracks, flaws and nodules of free lime. Faces must be plain and rectangular with sharp corners, and the colour should be uniform.
Hand-moulded bricks 90 mm or 70 mm high need a frog 10 to 20 mm deep on one flat face. By contrast, 40 mm bricks and extruded bricks may skip the frog. The maker’s mark goes in the frog when there is one.
How a lab tests bricks to IS 1077
A lab runs the IS 3495 methods on a sample drawn as per IS 5454:2024. A full check covers five tests:
- Compressive strength, IS 3495 (Part 1): the lab crushes soaked bricks and reports the average and the lowest result.
- Water absorption, IS 3495 (Part 2): the dry weight is compared with the weight after 24 hours in cold water.
- Efflorescence, IS 3495 (Part 3): the salt deposit after wetting and drying is rated nil, slight, moderate, heavy or serious.
- Warpage, IS 3495 (Part 4): the lab measures how far the faces and edges curve from flat.
- Dimensions: the 20-brick row described above.
At our bricks and blocks testing lab, Jancy Labs runs these tests under ISO/IEC 17025:2017, accredited by NABL (Certificate No. TC-12176; see our accreditation scope).
Why bricks fail IS 1077, and what to do
Most failures trace back to the clay and the firing. Under-burnt bricks are soft and porous, so they often fail both strength and absorption. Soluble salts in the clay or water cause efflorescence. In addition, uneven drying and firing cause warpage.
If a lot fails, do not reject it at once. First, check whether it meets the next lower class, as the standard allows. Then ask your structural engineer whether that class still suits the wall. For a doubtful result, request a retest on a fresh sample from the same lot.
Get Your Bricks Tested at Jancy Labs
Jancy Labs Private Limited is an accredited civil material testing laboratory (ISO/IEC 17025:2017, Certificate No. TC-12176) in Madurai, Tamil Nadu. We collect samples across Tamil Nadu and accept courier samples from anywhere in India.
Or call +91 86800 49004 · jancylabsmdu@gmail.com · Request a quote
4.8★ · 100+ Google reviews · Mon–Sat, 10:00–18:00
Frequently Asked Questions
Is IS 1077:1992 still valid?
No. BIS published IS 1077:2025, the sixth revision, in November 2025, and it supersedes the 1992 edition. Tenders and test requests should now cite the 2025 edition.
What is the minimum compressive strength of a brick as per IS 1077?
The lowest class is 3.5 N/mm² and the highest is 35 N/mm². Burnt clay bricks of 40 N/mm² or more fall under IS 2180 instead.
What is the water absorption limit for bricks?
After 24 hours in cold water, a brick may absorb up to 20% of its dry weight for classes up to 12.5, and up to 15% for higher classes.
How many bricks does a lab need for testing?
The sample size depends on the lot size and follows IS 5454:2024. The dimension check alone needs at least 20 whole bricks, so send extra.
